Bathroom

How to install a freestanding bathroom suite

bathroom suite The checklist below will help you and your fitter install your freestanding bathroom suite in the right way. The first important thing is checking whether the bathroom floor is well leveled as it is essential in handling the bath weight more so when you will put water in it. Space is also significant to note.    Transporting your bath is also critical since most are delicate and you wouldn’t want to incur other costs after breaking.  If possible or required, make sure your bath feet are attached. When you are fitting your bath and doing the plumbing work make sure your water system is turned off. The most crucial part is drilling the holes where they are supposed to be drilled. The holes are for pipe fitting. Before you refit the floor ensure you have tested the pipes for any possible leaks.  When you are through with the critical pipework which adversely depends on the bath type you choose a plumber will silicone the beading of your bath to help avoid crevices that can let in the dust. The silicone beading will dry after 24 hrs then you can start enjoying your bath.

Things to consider Contemporary and chic, that’s what a freestanding bath promises to give your bathroom longevity and outstanding ambiance. It comes with no wall support, and this is a dominated style that has a sturdy design features, be it pedestal bath or the traditional claw foot thus its variations.  This is without a doubt an incredibly exuberant addition to your bathroom. However, knowing how to fit your bath is most essential to avoid unnecessary drama. The floor level is essential for an evenly fitted bath, however there are baths with adjustable feet that can handle the variations in surface level.

Get help too from friends or family as bath is very heavy and you can’t carry it around alone.  Also, make sure to check the weight your floor can handle. This will protect your houses structural integrity from getting destroyed. Don’t just consider the bath weight without including when it is full of water. The location too should have at least about the 50mm gap on the wall and the bath. The gap is essential when cleaning the edges of your bath.

Freestanding bath design It is a great misconception to think that the design of a freestanding bath tab makes it complicated to install. That is not the truth; in fact, dealing with a freestanding bath is very easy and straightforward. Nonetheless, prior knowledge on the working of this kind of bath is essential. The plumbing makes the difference in this type of bathe; the piping goes to the floor which is different from other tabs that the piping passes through the wall.

Freestanding bath plumbing When fitting and plumbing a freestanding bath, the water supply should be off to avoid overflow or flooding. The fixing requires you to turn the bath upside down while attaching the feet if it came with. When in that upside position make sure there is enough support for your bath. To avoid scratches, you can place it on a dust sheet. When you are through with this part, and everything is on a proper level, you can turn your bath around and connect the pipes. If you are replacing your old bath or placing your bath in a new room, then you will need to reroute the pipes. If you chose a freestanding tap, the positioning matters and you should place them at points that will make it easy for water to reach your bath without flashing on the floor. Drilling the holes at the supply pipes will help water reach ideally at the intended place. Don’t forget to do a thorough pipe leak check once you are through with the fitting.  Be with a qualified plumber to show you the ins and out of the steps taken on the vital pipework, not forgetting the bath waste installation, pipework, and trap when fitting the freestanding bath.

Final prepping of your freestanding bath As earlier stated where the pipes go through must be silicone beaded by your plumber at the floor edges. This will save you a lot of dust trouble. Don’t use the bath until it is scorched from the fitting process.  Installing a bath can take mostly up to 2 days; nonetheless it mostly depends on your bath type and the problems your plumber will find. The issues can include rotting of the pipes, floorboards and other issues. When doing your fitting always have an alternative to avoid using the bath before it is properly fixed.

Conclusion With toddlers and babies arguably being the frequent bathers, limitations of your bath are significant to know about. Both adults and children safety should be considered while purchasing any bath. Remember accidents, like drowning or slipping, are some of the most common accidents you wouldn’t want to get involved in. It is not all about the great designs that matter, but care and precaution are essential. Some baths are too deep and getting out for toddlers or kids might be hard. Make sure you ensure your family’s needs before settling down for any bath. Get help from  some of the best and affordable baths available. With very competitive prices you won’t miss something you like.

YouTube
Pinterest
LinkedIn
Share