General

Advantages of LED Technology

Electrician Geelong: long life, less maintenance compared to conventional light sources, high energy efficiency, extensive color range by nature, instant ignition, extreme robustness, light direct, ecological and absence of infrared and ultraviolet. Here is a summary of the some advantages mentioned in the list below:

Long Useful Life

LEDs are diodes that emit light when current passes through semiconductors. A driver or power supply is needed to accurately provide the current that passes through the LED. On the other hand, in order to ensure its long life, the correct study and design of the dissipation of the heat produced by the diode inside the luminaire is very important. Having a good heat sink guarantees 50 thousand hours of life. The key is that there is a greater surface in direct contact with the air. In Leds-C4, if you cannot get a luminaire to maintain the ideal temperature for the LED to work at the correct temperature, it is not released into the catalog. The LEDs, correctly installed, can reach more than 50 thousand hours of life, conserving more than 70% of the original luminous flux.

High Energy Efficiency

Due to the extraordinary and continuous evolution of the LEDs towards energy efficiency, it is not possible to compare the luminous performance of the LED with its consumption. For this reason its efficiency is not measured with watts, but with the calculations of lumens per watt or lumens per LED.

Instant Ignition

Being another of the characteristics of the LED’s that their life is not reduced by the repeated actions of on and off. One example is the brake lights of cars, where it is used because it is very fast and it is not necessary to wait for the current to pass through the ballast and turn on. It will also depend on the equipment: If the equipment is of quality the LED will not take long to turn on.

Extreme Ruggedness

Another point in favor is the robustness: it is not that the LEDs are robust (pressed with a finger obviously the optics is damaged), but that this technology is resistant to the continuous vibrations.

Direct Light

The LED light is totally directional, so there is no light loss due to reflection. This contributes significantly to increase the efficiency and profitability of the luminaires. A clear example is the technical applications, such as a down light: If we use LED technology to have an opening of 120 ° and easily controllable with optics we avoid losses by reflection as we have in florescence down lights.

Ecological

Virtually the entire LED and Electrician Geelong are recyclable. Its compact design reduces the volume of the luminaire and the waste. It does not contain mercury or other elements harmful to the environment. In addition, its facility to be “dimmable” allows reducing the energy consumption.

Absence of Infrared and Ultraviolet

The LEDs used for lighting only emit flux in the visible spectrum of light that the human eye is capable of perceiving. There are high numbers of applications; For example, in museums the LED will clearly be a good option thanks to this feature. The LEDs do not emit ultraviolet light, which avoids the heat of the infrared and the wear of the materials in sideboards.

LED applications

In the words of the exhibitor www.albertcorn.com.au, the LEDs have been used in applications where it should not; “If we do things right, the companies that are selling substitutions that do not give the performance will end up dying by themselves. It is necessary to foresee the use that will be given to the luminaries, because you can obtain great savings, but if you do not have enough light intensity it would not be worth the investment “. Due to the rapid evolution of LED technology, the applications in which it is feasible to consider it as a light source expand exponentially.]]>

YouTube
Pinterest
LinkedIn
Share