Home Security

Tips For Fixing A Running Toilet

natural gas piping installation. If you are wanting to try and fix it yourself, below are some easy tips to follow in order to get you started. Check The Flapper The first thing that should be addressed when you have a constant running toilet is the flapper. Turn off the water behind the toilet and let the water drain out. This will allow you to properly check the flapper. When you flush your toilet, the flapper is supposed to lift up and then securely go back into place as the tank gets filled up. If the flapper needs the chain lengthened in order to fit securely, this can be a simple fix. Another common problem is that the flapper is warn and needs to be replaced. You can easily find one at your local hardware store.

Check Water Level If the flapper seems to be fine, the next most common issue causing a constant running toilet is the water level. If the water level goes too high, the water will be constantly draining into the overflow tube. This overflow tube is what connects the toilet bowl and the tank. When you flush your toilet, watch to see if the water continues to drain into the overflow tube after filling up. If this is happening, you can fix this by adjusting the level of the water by lowering the tank’s float. To do this properly, you will need to figure out what type of float you have. The two main types of floats are the float cup fill valve and a float ball fill valve.

These are just two of the most common and easily-fixed problems of a constant running toilet. To see if either of these was the culprit, turn the water valve back on and check to see if the toilet shuts off properly after flushing. If so, you did a great job. If the toilet needs more repairs, it might be time to call in a professional.