Air Duct Cleaning Services In Brantford

Air duct cleaning services in Brantford are cleaned and the air handling side of the furnace is cleaned to remove any loose dirt. HVAC unit is many types of tools and equipment and it can be used to successfully clean. Some companies are used truck-mounted equipment and others use portable vacuums. Air duct cleaning services in Brantford has proper cleaning equipment, when used properly, both types of equipment can get the job done correctly. There  are duct cleaning services proper cleaning equipment in the following:

  • Access Tools 

Access tools are consisting of devices used by technicians to create entry points in the HVAC system to facilitate inspection and cleaning. It is one of the accommodate service personnel entry and bulkier equipment.

  • Inspection Tools

Inspection devices can be used to estimate the build-up of debris and contamination.  This system is monitoring the cleaning process and evaluate the success of the cleaning methods employed. Some common tools are including:

  • Hand-held mirror
  • Direct‑view periscope (mirror device with eyepiece for right-angle viewing, often with light source attached)
  • Closed-circuit television (CCTV) camera system
  • Camera (35mm SLR, etc.)
  • Hand Cleaning Tools

Hand cleaning tools are including simple brushes and a number of pneumatic agitation and cleaning devices. This debris is often loosened from duct cleaning work and other HVAC system components by power brushing and/or manual brushing. These cleaning devices such as blowguns, air skippers and air whips are often utilized to drive agitated debris to the collection device. Fiberglass lined metal ductwork, flex duct, and duct board can be damaged by overly-aggressive removal techniques and must be handled accordingly.

  • Vacuum Collection Devices

Vacuum collection devices are used to produce negative pressure.  The HVAC system is ordered to control the spread of contaminants during the cleaning process. There are two main types of vacuum collection devices such as those mounted on trucks or trailers, and portable units. Truck and trailer-mounted equipment are commonly more powerful than portable equipment. It is allowing the vacuum source to be located closer to the ductwork.

  • Compressed Air Sources

Many tools and devices used for HVAC system cleaning methods and these are pneumatically powered. It requires the use of large amounts of pressure supplied directly to the tools. This is the most common method of supplying and this pressure is through the use of an air compressor.

  • Hand Vacuums and Wet Vacuums

Hand vacuums are used most commonly by HVAC cleaning contractors for a different of tasks and these are a common sight on any cleaning project. HEPA filtration is wanted for such vacuum cleaners, especially those designed to extract water as well as dry debris.