carpet cleaning, there are some very simple do’s and dont’s. But not all stains are created the same and you may need to develop different strategies for certain types. No one intends to spill something on their carpet, it usually happens by accident. Those accidents can be a long term nuisance if you don’t treat them quickly and properly.
Sometimes the way you attend to the mess can have a significant effect on whether or not you are able to eliminate it entirely. The purpose behind treating carpet stains is to eradicate any memory of their existence. Nothing damages the look and feel of an expensive floor covering like a wine stain that you couldn’t fully lift up, reminding you of your failure each and every time you walk into the room.
We’ve all been there, forced to face the mistakes of the past time and again. Spills and messes can be long-lasting issues if you don’t take charge of the situation from the get-go.
That means knowing how to treat carpet stains the proper way from the outset. If you enter the task with the proper knowledge for lifting that stain out fully, your success rate at tacking tough spills will be second to none.
You paid a lot for that gorgeous carpeting, don’t let the actions of a split-second accident ruin it forever.
Here are four tips and tricks for taking on some of the toughest carpet stains you’re likely to encounter over the life of your carpet. If you live in a home with children or pets, you may want to print this handy guide and stick it to the refrigerator or some area where you can access it at a moment’s notice.
In many cases, that’s all the time you’ll have before it becomes a lot harder to erase that stain for good.
1. Act Fast
This may not always be a possibility but the best rule for treating any stain, whether its wine, blood, or pet waste, is to remove as much as you can from the carpet.
When a spill is permitted to remain on the carpet fibers for an extended period of time, you’re exposing the material to concentrated levels of stain-making substances. The longer something is left on the carpet, the harder that is going to make it to lift the resulting stain from out of the material.
It might be a good idea to let everyone in the house or apartment know that time is of the essence and anyone who spills something on the carpet must alert you immediately to avoid a lasting stain.
2. Always Blot, Never Wipe!
The first and most important rule of treating a spill, any spill, no matter what, is to always blot at it. Gently but firmly absorb the excess moisture from the carpet by taking your cloth or towel or napkin or whatever and blotting away the spill.
Do not wipe! When you wipe you are most likely driving the stain further into the fibers so that it penetrates the surface and becomes much tougher to lift from the carpet. Wiping is only going to make the problem worse so don’t ever wipe a liquid or substance from the fibers.
Blotting allows you to lift as much of the mess without pushing it further into the carpet. As long as you remember this, you’re on the right track towards preserving the appearance of your beautiful carpet.
3. Flushing the Stain
Some liquids and substances are more concentrated than others which can have a tremendous effect on whether or not that spill becomes a stain after your clean it all up. For things like red wine or fruit juices, both of which contain ingredients that will all but permanently mark your carpet, flushing the stain with water or club soda can give you a fighting chance.
But be careful about doing this, as too much water and moisture can also permeate the carpet and seep underneath to the pad and the floor. If moisture gets trapped under there, it could lead to mold and mildew and that is the last thing you want growing under an installed carpet.
So be sparing about the water and blot at the stain as you flush it. Slowly but surely flush, then blot. This will help dilute the spill so it reduces the likelihood of a stain setting in.
4. Salt the Stain
After you’ve blotted out most of the spill, add some salt to the stain. The salt crystals will help to absorb the moisture that was left behind as you blotted at the mess. Blotting won’t soak it all up, so that’s where the salt comes in.
Let it sit for brief period of time, the salt will probably change color based on the substance you’re bringing up. Remove the salt and you will have taken most of the staining capability from the mess.
Then use a carpet cleaner or homemade cleanser to lift the rest. For those really stubborn stains, you may want to search for professional carpet cleaning Kirkland Wa and use heavy-duty cleaning equipment on that lingering mess.